RL111410AE 5111410AE denso 6SEU16C AC compressor for 2007-2012 Chrysler 200 /Sebring V6 3.5L L4 2.4L China factory compressor for Dodge Journey
- Price
- US $80-90
- Model
- INTL-XZC573M
- MOQ
- 1 set
Item specifics
- Size
- PACKING:28*25*20
- Type
- Compressor, DENSO 6SEU16C
- Car Make
- 6SEU16C Chrysler Sebring / 200 Dodge Grand Caravan / Avenger /JourneY
- OE NO.
- 55111408AE 55111410AD 55111408AC 55111441AB
- QUALITY
- 1 GRADE
- Car
- Chrysler Sebring / 200 Dodge Grand Caravan / Avenger / Journey
- Grooves
- 6PK PV6
- OEM
- 55111408AE 55111410AD 55111408AC 55111441AB
- Denso
- 447190-6863 CG447190-6862 447190-6862 CG447190-6863
- Omega
- 20-21791
Review
Description
Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.
DENSO 6SEU16C Chrysler Sebring / 200 Dodge Grand Caravan / Avenger / Journey AC compressor
Specification:
Model number: INTL-XZC573M
Car name: Chrysler Sebring / 200 Dodge Grand Caravan / Avenger / Journey
Year model: 2007-2012
Compressor Type: DENSO 6SEU16C
Grooves: PV6
Volt: 12V
Clutch DIA: 120mm
Oem/part number/PN:
55111408AE
55111410AD
55111408AC
55111441AB
RL111410AE
55111410AD
55111410AE
447190-6852
447190-6854
447260-1404
Denso:
447190-6863
CG447190-6862
447190-6862
CG447190-6863
Omega:
20-21791
Apply:
2011-2012 Chrysler 200 L4 2.4L 2360cc 144cid
2011 Chrysler 200
2012 Chrysler 200
2007-2010 Chrysler Sebring V6 3.5L 3497cc 215cid / L4 2.4L 2360cc 144cid
2007 Chrysler Sebring
2008 Chrysler Sebring
2009 Chrysler Sebring
2010 Chrysler Sebring
Packaging Detail
Shipping Detail
Our Factory
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced