10SR19C for Lexus LX570 LX-570 Toyota Landcruiser/ Sequoia 4.7L 5.7L 8pk 88320-6A320 883206A320 88310-6A330 883106A330
10SR19C for Lexus LX570 LX-570 Toyota Landcruiser/ Sequoia 4.7L 5.7L 8pk 88320-6A320 883206A320 88310-6A330 883106A330
Model
INTL-XZC1073

Item specifics

Size
PACKING:28*25*20
Type
Compressor
Car Make
for Lexus LX570 Toyota Landcruiser / Sequoia 4.7L 5.7L
OE NO.
88320-6A320 883206A320 88310-6A330 883106A330
QUALITY
1 GRADE

Review

Description

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

10SR19C Ac compressor for Lexus LX570 Toyota Landcruiser / Sequoia 4.7L 5.7L 8pk 

 

10SR19C for Lexus LX570 LX-570 Toyota Landcruiser/ Sequoia 4.7L 5.7L 8pk 88320-6A320 883206A320 88310-6A330 883106A330 

 

Specification:

Model number: INTL-XZC1073

Car name: Toyota Landcruiser / Sequoia Lexus LX570 

Year Model: 2008-2011

Compressor type: 10SR19C

Grooves: 8PK 

Voltage: 12V

Clutch DIA: 124mm

 

Special Notes:

OEM:

88320-6A320

883206A320

88310-6A330

883106A330

 

Details

Can be used for:

 

2008-2010 Lexus LX570 All Models

2008 Lexus LX570 kompressor

2009 Lexus LX570 kompressor

2010 Lexus LX570 kompressor

 

2008-2011 Toyota Landcruiser All Models

2008 Toyota landcruiser compressor

2009 Toyota landcruiser compressor

2010 Toyota landcruiser compressor

2011 Toyota landcruiser compressor

 

2008-2009 Toyota Sequoia 4.7L 5.7L

4.7L Toyota Sequoia kompresor

5.7L Toyota Sequoia kompresor

 

2010-2011 Toyota Sequoia All Models

 

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced