Denso 10P15/10P15C auto air con ac compressor for Mercedes Benz Acelo 915/Axor 2638
Denso 10P15/10P15C auto air con ac compressor for Mercedes Benz Acelo 915/Axor 2638
Price
US $50-120
Model
INTL-0017
MOQ
1 set

Item specifics

Size
PACKING:28*25*20
Type
Compressor
Car Make
DENSO 10P15/10P15C for Mercedes Benz Acelo 915/Axor 2638
OE NO.
INTL-0017
QUALITY
1 GRADE
car
for Mercedes Benz Acelo 915/Axor 2638

Review

Description

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

DENSO 10P15/10P15C for Mercedes Benz Acelo 915/Axor 2638 ac compressor

  

Denso 10P15/10P15C auto air con ac compressor for Mercedes Benz Acelo 915/Axor 2638

 

Specification:

Model number: INTL-0017

Car name: for Mercedes Benz 

Compressor type: DENSO 10P15 10P15C

Grooves: 8PK 

Voltage: 24V

 

 

Special Notes:

 

 

for Mercedes Benz Accelo 915 / Axor 2638

 

for Mercedes Benz Acelo 915

 

 

Packaging & Shipping

Packaging Detail

Denso 10P15/10P15C auto air con ac compressor for Mercedes Benz Acelo 915/Axor 2638

 

Shipping Detail

Denso 10P15/10P15C auto air con ac compressor for Mercedes Benz Acelo 915/Axor 2638

 

Our Factory

Denso 10P15/10P15C auto air con ac compressor for Mercedes Benz Acelo 915/Axor 2638

 

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced