Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

2000-2010 Mazda 6, GY, GG,2.0Lt Diesel AC compressor

Specification:

Model number: INTL-XZC023A

Car name: Mazda 6

Year model: 2000-2010

Compressor Type: Panasonic

Grooves: PV6

Volt: 12V

Clutch DIA: 125mm

Special Notes:

OEM:

5M81-19D629BA

GK2G-61450M

5M8119D629BA

GK2G61450M

GJ6A-61-K00B

GJ6A-61-K00F

GJ6A-61-K00C

GJ6A-61-K00A

GJ6A-61-K00D 

Panasonic:

H12A1AF4AO
H12A1AK4DW
H12A1AF4DV
H12A1AF4A0
H12A1AF4DW

Application for:

MAZDA 6 GG 2000 - 2008

MAZDA 6 GH 2008 - 2010

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced