China auto ac compressor 7PK HCC-F500 auto air ac compressor for FORD 2.4 DI/2.4 TDE/3.2 TDCi 8FK351113381 1440713
- Price
- US $80-90
- Model
- INTL-XZC368M
- MOQ
- 1 set
Item specifics
- Size
- 28*25*20cm
- Type
- Compressor
- Car Make
- for FORD 2.4 DI/2.4 TDE/3.2 TDCi
- OE NO.
- 1440713 1016001020 YC1H19D629AA
- Compressor type
- HALLA HCC-F500
- part #
- 8FK351113381 1800K167 6018K167 4502836
- Pulley DIA
- 126mm
- Volt
- 12v/24v
- Groove
- 7pk
Review
Description
Our factory can produce many kinds of auto air conditioner compressor with good quality and one year quality warrantee.
7PK HCC-F500 auto air ac compressor for FORD 2.4 DI/2.4 TDE/3.2 TDCi 8FK351113381 1440713
Details:
MODEL NO. | INTL-XZC368M |
compressor TYPE | HCC-F500 |
Pulley/Volt | 7PK/12V |
car fit | For FORD |
OEM:
4502836
55304273
850258N
210287
1 440 713
4 502 836
4 681 621
4 979 391
R20BYU19D629AA
1440713
1016001020
YC1H19D629AA
92060360
TSP0155377
8FK351113381
1800K167
6018K167
4502836
Apply for:
FORD 3.2 TDCi 2006-2007
FORD 2.4 DI 2000-2006
FORD 2.4 TDE 2001-2006
FORD 3.2 TDCi bus 2000-2006
Packaging Detail
Shipping Detail
Our Factory
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced