China supply 977014H010 977014H000 QB7AB-03 F500-QB7AB-03 HS20 auto air condition parts compressor for Kia - GRAND STAREX 2008-2014
- Price
- US $80-90
- Model
- INTL-XZC367M
- MOQ
- 1 piece
Item specifics
- Size
- 28*25*20cm
- Type
- Compressor
- Car Make
- for Kia - GRAND STAREX 2008-2014
- OE NO.
- 977014H010 977014H000 QB7AB-03 F500-QB7AB-03
- Type model
- Halla-HCC HS-20
- Manufacturer
- Halla-HCC
- Clutch diameter
- 117 mm
- Volt
- 12 V
- part #
- D_0035_359876
Review
Description
Our factory can produce many kinds of auto air conditioner compressor with good quality and one year quality warrantee.
977014H010 977014H000 QB7AB-03 F500-QB7AB-03 HS20 auto air conditioner parts compressor for Kia Hyundai
Details:
MODEL NO. | INTL-XZC367M |
compressor TYPE | Halla-HCC HS-20 |
Pulley/Volt | 7PK/12V |
car fit | For Kia |
OEM:
977014H010
977014H000
QB7AB-03
F500-QB7AB-03
D_0035_359876
Apply:
for Kia GRAND STAREX oem #97701-4H010
More products, you can look through our website: www.intl2008.com
Packaging Detail
Shipping Detail
Our Factory
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced