China manufacture 6pk A/C Compressor MSC130CVSG2 89022486 67476 for CHEVROLET VENTURE PONTIAC
- Price
- US $80-90
- Model
- INTL-XZC342M
- MOQ
- 1 set
Item specifics
- Size
- 20*20*25cm
- Type
- Compressor
- Car Make
- for CHEVROLET VENTURE
- OE NO.
- 89022486 1520445 1520743
- Compressor Type
- MSC130CVSG2
- fit
- for OLDSMOBILE SILHOUETTE
- apply
- for PONTIAC MONTANA
- Clutch diameter
- 102mm
Review
Description
6pk A/C Compressor MSC130CVSG2 89022486 67476 for CHEVROLET VENTURE PONTIAC
Details:
MODEL NO. | INTL-XZC342M |
compressor TYPE | MSC130CVSG2 |
Pulley/Volt | 6PK/12V |
car fit | For CHEVROLET |
OEM:
89022486
1520445
1520743
15-21183
10424737
19130448
88892652
0009824
88892652
88898738
10349171
CO 21183T
CS10050
11167476
67476
20-11285-R
10349170
67476
Apply:
for CHEVROLET VENTURE
for OLDSMOBILE SILHOUETTE
for PONTIAC MONTANA
More products about other brand cars air conditioning parts, you can look through our website:
www.intl2008.com
Packaging Detail
Shipping Detail
Our Factory
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced
We have manufactured and exported ac parts to all over the world for more than 10 years.
We have a professional team to manufacture and pack the commodities for u, and we will give the best price and the best quality