SANDEN 7H13 SD7H13 8949 S8949 8908 auto air con ac COMPRESSOR with AA 125mm pulley

Download the description details at PDF:INTL-C118A

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

SANDEN 7H13 SD7H13 AA 125mm ac COMPRESSOR

Specification:

Model number: INTL-C118

Car name for: universal

Compressor Type: SD7H13

Clutch DIA: 125mm

Grooves: 2pk 

Volt: 12V/24V 

OEM#

8949

S8949

8908

CAN USED FOR:

FORD LASER KC 1985 – 1987

FORD LASER KE 1987 – 1991

FORD METEOR GC 1985 – 1987

HOLDEN GEMINI RB 1985 – 1987

MAZDA 323 BF 1985 – 1989

MITSUBISHI COLT RA 1978 – 1982

MITSUBISHI COLT RB – RC 1983 – 1992

Our Factory

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced