China supply AC Compressor VS16 PV4 for Hyundai Elantra L4 2.0L 1 2007 -2012 2008 2009 2010 2011 Part No# 447200-9464 10R-12971 447200 9464

We supply many kinds of Auto Air Conditioner Compressors with good quality and long life.

VS16 VS-16 Compressor for Hyundai Accent L4 1.6 2006 - 2008 /

Hyundai Elantra L4 2.0L 1 2007 -2012

Details:

INTL Model .:INTL-XZC562

COMPRESSOR TYPE:VS16                                    

NUMBER OF RIBS:4 Groove                                 

Pulley Diameter: 122MM

Pulley Distance: 70MM                          

OEM#97701-1E000

97701-1E000 Hyundai Elantra

97701 1E000 Hyundai Elantra

977011E000

oem#CB5AA06

CB5AA06 Hyundai Elantra

APPLICATION FOR:

Hyundai Accent L4 1.6 2006 - 2008  2007

Hyundai Elantra L4 2.0L 1 2007 -2012 2008 2009 2010 2011  

Our Factory

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

Item Highlights:

No noise

Durable material clutch and good quality bearing assembled

Good sealing and no leak

Satisfying cooling effect.

Stable and durable working performance

Pre-oiled/ Oil contained

Kindly Reminder:

To keep the long service life and make sure your air conditioning good working,you are suggested to keep the right car aircon maintenance.

• Inspect the Compressor Belt: If happens “sound” noise, then serious belt creep, you should replace the new one; Give adjustment if the belt too loose.
• Clean the Condenser: Regularly clean the condenser with the water pipe to distribute the heat, increasing cooling effect
• Inspect the Refrigerant Liquid Surface Height: See from the dryer peep hole to check air-conditioning normal operation
• Ensure the enough Refrigerants: Inspect the temperature difference between entrance pipe and exit pipe or use manifold pressure gauge set to confirm if the refrigerant is enough.
• Inspect if has oil stains in hose fitting. Go to the maintenance if discover leakage