SANDEN PXE16 VW Volkswagen Jetta Beetle GTI Golf Rabbit air ac compressor pv10 1K0820803K 1K0820859G 1K0-820-859G 1KO-820-859-G
- Price
- US $80-150
- Model
- INTL-PXE16
- MOQ
- 1 set
Item specifics
- Size
- PACKING:25*20*18
- Type
- Compressor
- Car Make
- PXE16 VW Volkswagen Jetta Beetle GTI Golf Rabbit
- OE NO.
- 1K0820803K 1K0820803R 1K0820859G 1K0 820 859G 1K0820803T 8685 8686
- QUALITY
- 1 GRADE
- Car name
- VW Jetta Beetle GTI Golf Rabbit
- Compressor Type
- SANDEN PXE16
- Grooves
- PV5+PV5
- OEM
- 1K0820803K 1K0820803R 1K0820808C 1K0820859G 1K0-820-859G
- Sanden
- 1616 1616A 8685 8686 8688 8689 1K0820803T 1KO-820-859-G
- Volkswagen Beetle 2.5L
- 2006-2010
- Volkswagen GTI 2.0L
- 2010-2011
- Volkswagen Golf 2.5L
- 2007-2011
- Volkswagen Jett 2.5L
- 2005-2011
Review
Description
Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.
PXE16 VW Volkswagen Jetta Beetle GTI Golf Rabbit ac compressor
Specification:
Model Number: INTL-PXE16
Car name:VW Jetta Beetle GTI Golf Rabbit
Year model: 2005-2011
Compressor Type: SANDEN PXE16
Grooves: PV5+PV5
Clutch DIA: 127/110mm
Volt:12V
Special Notes:
Details
2006-2010 Volkswagen Beetle 2.5L
2006 VW Beetle
2007 VW Beetle
2008 VW Beetle
2009 VW Beetle
2010 VW Beetle
2010-2011 Volkswagen GTI 2.0L
2010 VW GTI
2011 VW GTI
2007-2011 Volkswagen Golf 2.5L
2007 VW Golf
2008 VW Golf
2009 VW Golf
2010 VW Golf
2005-2011 Volkswagen Jett 2.5L
2005 VW Jett
2006 VW Jett
2007 VW Jett
2008 VW Jett
2009 VW Jett
2010 VW Jett
2011 VW Jett
2006-2009 Volkswagen Rabbit 2.5L
2006 VW Rabbit
2007 VW Rabbit
2008 VW Rabbit
2009 VW Rabbit
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced