ac compressor 10PA20H 6GR 5.06 in 93-97 LEXUS GS300 447200-0112 447200-6129 Toyota Crown 3.0 90>95
- Price
- US $50-120
- Model
- INTL-XZC196
- MOQ
- 1 set
Item specifics
- Size
- PACKING:28*25*20
- Type
- Compressor
- Car Make
- 10PA20H 90>95 Toyota Crown / 1993>1997 Lexus GS300
- OE NO.
- 447200-0112 447200-6129 4472000112 4472006129
- QUALITY
- 1 GRADE
Review
Description
Our factory can produce many kinds of auto Air Conditioner Compressor with good quality and one year quality warrantee.
Clutch Diameter 133mm
Oil Type PAG 46
Oil Capacity Oz 7
Omega Oil No 41-50102
Grooves 6
Voltage 12
Compressor Mount 3 EAR
1994 Lexus GS300 L6 3.0L 2997cc
1995 Lexus GS300 L6 3.0L 2997cc
447200-0112
447200-6129
Toyota Crown 3.0 90>95
Specification:
Model number: INTL-XZC196
Car name: Toyota Crown 90>95 Lexus GS300 1993-1997
Compressor type: 10PA20H
Clutch DIA: 133mm
Year Model: 1993-1997
Grooves: PV6
Voltage: 12V
Oil Type PAG 46
Oil Capacity Oz 7
Omega Oil No 41-50102
Special Notes:
OEM:
447200-0112
447200-6129
4472000112
4472006129
Details
1993-1997 LEXUS GS300 L6 3.0L 2997cc
1993 Lexus GS300
1994 Lexus GS300
1995 Lexus GS300
1996 Lexus GS300
1997 Lexus GS300
1990-1995 Toyota Crown 3.0
1990 Toyota Crown
1991 Toyota Crown
1992 Toyota Crown
1993 Toyota Crown
1994 Toyota Crown
1995 Toyota Crown
95" ori-width="800" ori-height="631" />
95" ori-width="800" ori-height="627" />
95" ori-width="800" ori-height="711" />
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced