auto a/c ac compressor NVR140S Nissan Pulsar/ Sentra B12 1.6 1.8 4PK kompressor 92600-84A00 92600-84A10 92600-84A15 92600-84A16

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

NVR140S Nissan Pulsar/ Sentra B12 1.6 1.8 4PK kompressor

Specification:

Model number: INTL-XZC607

Car name: Nissan Sentra B12 Pulsar

Type: NVR140S

Pulley: 4PK

Volt: 12V 

Year Model: 1988-1992

Special Notes:

OEM# 

92600-84A00

92600-84A10

92600-84A15 

92600-84A16 

9260084A00

9260084A10

9260084A15 

9260084A16 

Details

1988-1989 Nissan Pulsar L4 1.6 1.8

1988-1992 Nissan Sentra B12 L4 1.6

Kompresor Nissan B12

kompresor Pulsar

NISSAN B12 COMPRESSOR

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced