denso 10s20c AUTO ac Compressor for Honda Odyssey 6pk 2004-2006 38810PGM003 447170-6754 447220-3694 447220-3692 38810-PGM-003
- Price
- US $60-160
- Model
- INTL-0221
- MOQ
- 1 set
Item specifics
- Size
- PACKING : 25*22*19
- Type
- Compressor, DENSO 10s20c
- Car Make
- 10S20C for Honda Odyssey 6pk
- OE NO.
- 447170-6754 447220-3694 447220-3692 38810-PGM-003 4471706754
- QUALITY
- GRADE ONE
- 2004-2006
- Honda Odyssey 2.4
- OEM
- 447170-6754 38810-PGM-003 4471706754 38810PGM003
- Denso
- 4472203694 4472203692 447220-3694 447220-3692
- Car
- Honda Odyssey
- Pulley
- 6PK pv6
- Year
- 2004-2006
Review
Description
Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.
DENSO 10S20C Honda Odyssey 6pk pulley ac compressor
Specification:
Model number: INTL-0221
Car name: Honda Odyssey
Type: 10S20C
Pulley: PV6
Volt: 12V
Clutch:120mm
Year:2004-2006
Special Notes:
OEM#
447170-6754
38810-PGM-003
4471706754
38810PGM003
Denso:
4472203694
4472203692
447220-3694
447220-3692
Details
2004-2006 Honda Odyssey compressor
10s20c Honda odyssey 2.4L compressor
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced