SD7H15 air conditioner ac compressor SANDEN 7H15 Agco Massey Ferguson 2pk 3779466M1 3763384M91 7960 8056 7878 8096
SD7H15 air conditioner ac compressor SANDEN 7H15 Agco Massey Ferguson 2pk 3779466M1 3763384M91 7960 8056 7878 8096
Price
US $40-120
Model
INTL-C134
MOQ
1 set

Item specifics

Size
PACKING : 25*22*19
Type
Compressor
Car Make
SANDEN 7H15 Agco Massey Ferguson 2pk
OE NO.
3779466M1 3763384M91 7960 8056 7878 8096
QUALITY
GRADE ONE
Car name
Agco Massey Ferguson
Compressor Type
SANDEN 7H15
Pulley
2PK
OEM#
3779466M1 3763384M91
Sanden:
7960 8056 7878 8096

Review

Description

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

SANDEN 7H15 Agco Massey Ferguson 2pk kompressor

 

 SD7H15 air conditioner ac compressor SANDEN 7H15 Agco Massey Ferguson 2pk 3779466M1 3763384M91 7960 8056 7878 8096

 

Specification:

Model number: INTL-C134

Car name: Agco Massey Ferguson

Compressor Type: SANDEN 7H15

Clutch DIA: 132mm

Pulley:2PK

Volt: 12V 

 

Special Notes:

 

OEM#

3779466M1

3763384M91

 

Sanden:

7960

8056

7878

8096

 

Details

 

Agco-Massey-Ferguson-01-7H15-2GA AC COMPRESSOR

 SD7H15 air conditioner ac compressor SANDEN 7H15 Agco Massey Ferguson 2pk 3779466M1 3763384M91 7960 8056 7878 8096SD7H15 air conditioner ac compressor SANDEN 7H15 Agco Massey Ferguson 2pk 3779466M1 3763384M91 7960 8056 7878 8096

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced