air conditioning ac compressor 2001-2004 Jeep Grand Cherokee 2.7CRD 6pk 447220-4840 447180-4620 4472204840 4471804620 55116839AA
- Model
- INTL-XZC068A
Item specifics
- Size
- PACKING : 25*22*19
- Type
- Compressor
- Car Make
- 10S17C Chrysler Jeep Grand Cherokee 6pk
- OE NO.
- 447220-4840 447180-4620 4472204840 4471804620 55116839AA
- QUALITY
- GRADE ONE
- Car name
- Chrysler Jeep Grand Cherokee
- Compressor Type
- 10S17C
- Pulley
- 6PK
- OEM#
- 55116839AA
- Denso:
- 447220-4840 447180-4620 4472204840 4471804620
Review
Description
Download the PDF Document at hereINTL-XZC068A
Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.
10S17C Chrysler Jeep Grand Cherokee 6pk kompressor
Specification:
Model number: INTL-XZC068A
Car name: Chrysler Jeep Grand Cherokee
Compressor Type: 10S17C
Clutch DIA: 118mm
Pulley:6PK
Volt: 12V
Special Notes:
OEM#
55116839AA
Denso:
447220-4840
447180-4620
4472204840
4471804620
Details
2001-2004 Jeep Grand Cherokee 2.7CRD
2001 Jeep Grand Cherokee
2002 Jeep Grand Cherokee
2003 Jeep Grand Cherokee
2004 Jeep Grand Cherokee
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced