AE8319D629AB AE8319D629AC AE8319D629AD HCC HALLA HS-15 HS15 auto A/C ac compressor for 2011-2013 Ford Fiesta 1.6
- Model
- INTL-XZC1139N
Item specifics
- Size
- PACKING : 20*20*25
- Type
- Compressor
- Car Make
- HCC HALLA HS-15 HS15 Ford Fiesta
- OE NO.
- AE8319D629AB AE8319D629AC AE8319D629AD BE8Z19703A YCC261 AE83-19D629AD
- QUALITY
- GRADE ONE
- Car name
- Ford Fiesta
- Compressor type
- HCC HALLA HS-15 HS15
- Pulley
- 6PK
- Clutch DIA
- 122mm
- OEM
- AE8319D629AB AE8319D629AC AE8319D629AD BE8Z19703A YCC261 AE83-19D629AD
- Ford Fiesta 1.6 comprensor
- 2011 2012 2013
Review
Description
Our factory can produce many kinds of auto air Compressor with good quality and one year quality warrantee.
HCC HALLA HS-15 HS15 Ford Fiesta 6PK ac compressor
INTL-XZC1139N
Specification:
Model number: INTL-XZC1139N
Car name: Ford Fiesta
Compressor type: HCC HALLA HS-15 HS15
Pulley: 6PK
Clutch DIA: 122mm
Volt: 12V
Special Notes:
OEM#
2011-2013 Ford Fiesta 1.6 comprensor
YEAR | MAKE | MODEL | ENGINE |
---|---|---|---|
2011 | Ford | Fiesta | L4 1.6L 1596cc 97cid |
2011 | Ford | Fiesta | L4 1.6L 1598cc 98cid |
2012 | Ford | Fiesta | L4 1.6L 1596cc 97cid |
2012 | Ford | Fiesta | L4 1.6L 1598cc 98cid |
2013 | Ford | Fiesta | L4 1.6L 1596cc 97cid |
2013 | Ford | Fiesta | L4 1.6L 1598cc 98cid |
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced