air ac compressor Komatsu Denso 10PA15C 24V 1pk 447200-1741 447200-0246 4472001741 4472000246 1959118990 4250721180 20Y9793110
air ac compressor Komatsu Denso 10PA15C 24V 1pk 447200-1741 447200-0246 4472001741 4472000246 1959118990 4250721180 20Y9793110
Price
US $60-180
Model
INTL-XZC706
MOQ
1 set

Item specifics

Size
PACKING : 25*22*19
Type
Compressor
Car Make
Denso 10PA15C Komatsu 1GB
OE NO.
447200-1741 447200-0246 4472001741 4472000246 1959118990 4250721180
QUALITY
GRADE ONE
Car name
Komatsu
Compressor Type
Denso 10PA15C
Volt
24V
OEM number
195-911-8990 425-07-21180 20Y-979-3110 0K242-61-K00A 20Y-979-3111
DENSO
447200-1741 447200-0246 4472001741 4472000246
OEM
1959118990 4250721180 20Y9793110 0K24261K00A 20Y9793111

Review

Description

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

Denso 10PA15C Komatsu 1GB ac COMPRESSOR

 

  air ac compressor Komatsu Denso 10PA15C 24V 1pk 447200-1741 447200-0246 4472001741 4472000246 1959118990 4250721180 20Y9793110

 

Specification:

Model number: INTL-XZC706

Car name: Komatsu

Compressor Type: Denso 10PA15C

Grooves: 1GB
Clutch diameter: 152mm
Volt: 24V

 

Special Notes:

OEM number:

195-911-8990

425-07-21180

20Y-979-3110

0K242-61-K00A

20Y-979-3111 

1959118990

4250721180

20Y9793110

0K24261K00A

20Y9793111 

 

DENSO:

447200-1741

447200-0246

4472001741

4472000246 

 

Details

 

air ac compressor Komatsu Denso 10PA15C 24V 1pk 447200-1741 447200-0246 4472001741 4472000246 1959118990 4250721180 20Y9793110

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced