DENSO 10SA13 95200-M68KA1 95200M68KA1 240809A33697 447280-0490 4472800490 AUTO AC COMPRESSOR FOR NISSAN SUZUKI
DENSO 10SA13 95200-M68KA1 95200M68KA1 240809A33697 447280-0490 4472800490 AUTO AC COMPRESSOR FOR NISSAN SUZUKI
Model
INTL-XZC720

Item specifics

Size
PACKING : 25*22*19
Type
Compressor, DENSO 10SA13
Car Make
DENSO 10SA13 Nissan Suzuki
OE NO.
95200-M68KA1 95200M68KA1 240809A33697 447280-0490 4472800490
QUALITY
GRADE ONE
Car name
Nissan Suzuki
Pulley
4PK
OEM
95200-M68KA1 95200M68KA1 240809A33697
DENSO
447280-0490 4472800490

Review

Description

Download the description details at PDF:INTL-XZC720INTL-XZC720



Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warranty

.


DENSO 10SA13 Nissan Suzuki ac compressor



Specification:

Model number: INTL-XZC720

Car name: Nissan Suzuki

Type: DENSO 10SA13

Pulley: 4PK

Volt: 12V

Clutch: 120mm



OEM#

95200-M68KA1

95200M68KA1

240809A33697

Denso:

447280-0490

4472800490







Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced