92600-JM01C 92600JM01C Calsonic DKS-17D/DKS17D auto ac compressor for Nissan Rogue 2.5L 2008 2009 2010 2011
92600-JM01C 92600JM01C Calsonic DKS-17D/DKS17D auto ac compressor for Nissan Rogue 2.5L 2008 2009 2010 2011
Price
US $80-120
Model
INTL-XZC736A
MOQ
1 set

Item specifics

Size
PACKING:28*25*20
Type
Compressor
Car Make
Calsonic DKS-17D/DKS17D 2008-2011 for Nissan Rogue 2.5L
OE NO.
92600-JM01C 92600JM01C
QUALITY
1 GRADE
type
Calsonic DKS-17D/DKS17D
car
2008-2011 for Nissan Rogue 2.5L
oem
92600-JM01C 92600JM01C

Review

Description

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

Calsonic DKS-17D/DKS17D 2008-2011 Nissan Rogue 2.5L ac compressor

 

92600-JM01C 92600JM01C Calsonic DKS-17D/DKS17D auto ac compressor for Nissan Rogue 2.5L 2008 2009 2010 2011

 

Specification:

Model number: INTL-XZC736A

Car name: Nissan Rogue

Compressor type: Calsonic DKS-17D/DKS17D

Year Model: 2008-2012

Grooves: 6PK 

Voltage: 12V

 

 

Special Notes:

OEM NO.:

 

92600-JM01C

92600JM01C

 

Details

2008-2011 Nissan Rogue 2.5L

 

92600-JM01C 92600JM01C Calsonic DKS-17D/DKS17D auto ac compressor for Nissan Rogue 2.5L 2008 2009 2010 2011

92600-JM01C 92600JM01C Calsonic DKS-17D/DKS17D auto ac compressor for Nissan Rogue 2.5L 2008 2009 2010 2011

92600-JM01C 92600JM01C Calsonic DKS-17D/DKS17D auto ac compressor for Nissan Rogue 2.5L 2008 2009 2010 2011

92600-JM01C 92600JM01C Calsonic DKS-17D/DKS17D auto ac compressor for Nissan Rogue 2.5L 2008 2009 2010 2011

 

92600-JM01C 92600JM01C Calsonic DKS-17D/DKS17D auto ac compressor for Nissan Rogue 2.5L 2008 2009 2010 2011

 

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced