920423 4473001170 Air conditioning Compressor 10PA15C for MITSUBISHI MITSUBISHI PAJERO,Townace, Dyna China factory
- Price
- US $80-90
- Model
- INTL-XZC351M
- MOQ
- 1 piece
Item specifics
- Size
- 20*20*25cm
- Type
- Compressor
- Car Make
- for Toyota Landcruiser HiLux
- OE NO.
- 4473001170 92-0423
- compressor model
- 10PA15C
- Part Number
- 920423 550049 447200944 4472000996
- clutch DIA
- 125mm
- Volt
- 12V
- fit
- for MITSUBISHI PAJERO,Townace, Dyna
Review
Description
10PA15C Car ac pump air con compressor for Mitsubishi Pajero
Details:
MODEL NO. | INTL-XZC351M |
compressor TYPE | 10PA15C |
Pulley/Volt | 1PK/12V |
car fit | For MITSUBISHI Toyota |
OEM:
4473001170
920423
92-0423
550049
920423
550049
447200944
4472000996
Apply:
for Toyota Landcruiser HiLux
for MITSUBISHI PAJERO,Townace, Dyna
Landcruiser | FJ70, 73,75 | 3/90 - 9/92 |
HiLux | LN 85, 105, 106, 111 | 88 -7/97 |
HiLux | LN147, 152, 167,172 | 8/97 on |
Dyna | LY211 | 9/95 on |
Dyna | LY 61,211 | 93 -95 |
Town Ace | KR 42 | 10/96 on |
Pajero | NJ-NK 3lt, 3.5lt V6 | 8/93 - 6/97 |
Packaging Detail
Shipping Detail
Our Factory
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced