Sanden 7H13 Auto Ac Compressor Kobelco Case Serie Excavator TDK-R151320S
- Model
- INTL-C151
Item specifics
- Size
- PACKING:25*20*18
- Type
- Compressor
- Car Make
- Kobelco Case Serie Excavator
- OE NO.
- 7351 TDK-R151320S KHR3241 TDKR151320S TDKR151340S
- oem
- TDK-R151320S KHR3241 TDKR151320S TDKR151340S
- Sanden
- 7351 Sanden MT cylinder head
- Application for
- Case Construction Excavator Track CX 160 210 240 290 330
- USED
- KOBELCO SK 200 KOBELCO SK 400 LINK-BELT EXCAVATORS 3400
Review
Description
Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warranty
Sanden 7H13 SD7H13 Kobelco Case Serie Excavator compressor
Specification:
Model number: INTL-C151
Car name: Kobelco Case
Type: Sanden 7H13 SD7H13
Grooves: 1GB
Clutch DIA:146mm
Voltage: 24V
TDK-R151320S
KHR3241
TDKR151320S
TDKR151340S
Sanden:
7351
Sanden MT cylinder head
Application for:
Case Serie CX
Case Construction Excavator Track CX 160
Case Construction Excavator Track CX 210
Case Construction Excavator Track CX 240
Case Construction Excavator Track CX 290
Case Construction Excavator Track CX 330
LINK-BELT EXCAVATORS 3400
Packaging Detail
Shipping Detail
Our Factory
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced