UAC NEW HOSE SUCTION & DISCHARGE ASSEMBLY FITS Contour Mystique 1995 - 1997 TEM200731 3463811 55872 T55872 40111306 781097 F5RZ19D734AA 55872 4811465
UAC NEW HOSE SUCTION & DISCHARGE ASSEMBLY FITS Contour Mystique 1995 - 1997 TEM200731 3463811 55872 T55872 40111306 781097 F5RZ19D734AA 55872 4811465
Model
INTL-MH518

Item specifics

OE NO
HA 111306C TEM200731 3463811 55872 T55872
Car model
for Contour Mystique 1995 - 1997
OEM
40111306 781097 F5RZ19D734AA 55872 4811465

Review

Description

 We can offer all car's ac air conditioning hose ( Ac Suction hose, Liquid line and Discharge hose assy ), promise these Hose are original Goodyear brand, High quality.

 

 


UAC NEW HOSE SUCTION & DISCHARGE ASSEMBLY FITS Contour Mystique 1995 - 1997 TEM200731 3463811 55872 T55872 40111306 781097 F5RZ19D734AA 55872 4811465 

 

 

 INTL-MH518.jpg

 

 

 

Specification:

Model No.: INTL-MH518

car for : for Contour Mystique 1995 - 1997

OEM:

HA 111306C

TEM200731

3463811

55872

T55872

40111306

781097

F5RZ19D734AA

55872

4811465

 

 

Package: 1 pcs per one bag 

 

  

    Contact.jpg

 

Kindly remind for Automotive ac hose:

1, Types of Refrigerant Lines:

The major components of an air conditioning system all have an inlet and outlet connection. It's the refrigerant lines that connect these parts together allowing them to function as one. O-ring seals are provided at the various connections providing a tight seal while allowing for some flexibility to absorb vibration and movement. This design also facilitates the replacement of individual pieces.

All automotive AC will have at least three major refrigerant lines. These include the suction hose, liquid line and the discharge. The suction hoses are located between the outlet side of the AC evaporator and the inlet side of the compressor. It's referred to as the suction side because this is where the compressor uses vacuum to pull in refrigerant. These are low pressure hoses that should be cool to the touch when operating and larger in diameter than the others found throughout the system.

2, High Pressure Tubing

The discharge line connects from the outlet of the compressor and runs to the inlet of the AC condenser located out in front of the radiator. This can cover a lot of ground on some automobiles and therefore is often the longest. The liquid line connects the condenser outlet to the receiver drier also known as the accumulator on some applications. This is the only line that is carrying Freon in the liquid state hence its nickname.

Discharge and liquid lines are always very warm to the touch and easily distinguishable from the much larger diameter suction line. Both of these high pressure hoses are made up mostly of aluminum tubing but can contain small sections of rubber hose to allow for flexibility and safe routing in the engine compartment. Any rubber hose utilized in an air conditioning system is specially manufactured to carry refrigerant. Vehicles that use the R134A type of Freon have an additional layer of rubber that serves as a barrier to prevent the refrigerant from escaping through the pores of the hose.