R410a r22 spool remover installation tool with dual sae size 1/4 and 5/16 ports for r404a r407c r134a r12 r22 hvac system
R410a r22 spool remover installation tool with dual sae size 1/4 and 5/16 ports for r404a r407c r134a r12 r22 hvac system
R410a r22 spool remover installation tool with dual sae size 1/4 and 5/16 ports for r404a r407c r134a r12 r22 hvac system
Model
INTL-XG066

Item specifics

Type
Value Core
Condition
totally new
Valve Core:
R134a/R22
Stock
mass stock

Review

Description


Product Description

Description

R410a r22 spool remover installation tool with dual sae size 

1/4 and 5/16 ports for r404a r407c r134a r12 r22 hvac system

Yellow color
Package weight: about 200g

Service port:1/4 inch and 5/16 inch leaves internal thread
Bypass port: 1/4 inch outside line goes out
Material: Copper




Professional Wizard: Used to remove and install the reel in the live system. Replace the pouring spool quickly and easily. Double size, used for R410a or R22 charging system or other modified replacement system.
Excellent workmanship: The spool remover installation tool is made of solid brass, which is durable and not easy to oxidize; The metal knob adopts a knurled slip protector design, which is durable and can be used for a long time.
Time Saving: The cutting tool is convenient to insert the inner valve and control the core without stopping or releasing the refrigerant. It is convenient to disassemble and install the valve core, saving hours of emptying and filling time.



Basic operation of the spool removal switch:
1. Remove the dead center on the valve stem, close the valve on the tool, adjust the connection between the tool and the air conditioner interface, and tighten the valve on the air conditioner.
2. Make sure the tool is well connected to the air conditioning valve, then open the valve on the tool. Push the valve stem into the air conditioning valve and gently turn the puller tail knob. Find the angle the spool is attached at and then release it.
3. After removing the valve core, remove the valve stem, close the valve on the remover, loosen the screw at the end of the tool and remove the valve core. The job is done!
Note: It is recommended to close the spool switch valve and disconnect the internal connection of the air conditioner before disassembling the spool.
bullet points:
1 professional assistant assistant: it is used to remove and install the reel in the live system. Quickly and easily replace the casting spool. Double size is suitable for r410a or r22 charging system or other modified replacement systems.
2 Easy to Use and Durable: The Valve Core Remover Installation Tool is made of solid brass, which is durable and not easy to oxidize. The metal buttons are knurled design slip protector, which is durable and you can use them for a long time.
3 Easy to use: The core tool can easily insert it into the inner valve, so you can control the core without stopping or releasing the refrigerant. You can easily remove and install the valve core, saving evacuation and loading time.
4 Durable Durable Material: Brass material has better ductility and sealing, will not corrode and rust, and is more durable.

More

PACKAGE & DELIVERY                                                             

 

 

OUR SALES TEAM & OFFICE                                                   

 

 Efficient sales team waiting for your inquiries ! 

 

 

      

EXHIBITIONS                                                                             

 

 Thank you for all buyers ' support !

 

 

 

PRODUCT CATEGORIES