A/C Compressor for Hyundai i10 Kia Ray OE 97701-A3001
- Model
- INTL-XZC2446A
Item specifics
- Item Number
- INTL-XZC2446A
- OE NO.
- 97701-A3001
- Compressor Type
- RS11
- Pulley Grooves
- 6PK
- Pulley diameter
- 117-121MM
- Volt
- 12V
- Refrigerant
- R134a
- Oil
- PAG46 OR EQUIV
- Car Make/Model
- HYUNDAI i10 / KIA Ray
- Weight
- 23.12 KG
- Packing Size
- 40*30*46 cm
Review
Description
Why This RS11 Compressor for Hyundai i10 / Kia Ray?
Item INTL-XZC2446A is built to the RS11 configuration with a 6PK / 117-121MM pulley and 12V operation, matched to OE 97701-A3001 for Hyundai i10 / Kia Ray. Every value below is taken from the actual part — check it against your original unit before ordering.
Where This Compressor Sits in the A/C System
In a fuel-vehicle A/C loop like the one shown, the compressor circulates refrigerant through the condenser, expansion valve and evaporator. Item INTL-XZC2446A is the compressor matched to OE 97701-A3001 for Hyundai i10 / Kia Ray — running on R134a refrigerant with PAG46 OR EQUIV oil. Use the layout below to see how the part you are replacing connects to the rest of the system.
Built for Fuel-Vehicle A/C Systems
This is a fuel-vehicle air conditioning system — the type fitted to the Hyundai i10 / Kia Ray this compressor serves. The RS11 compressor is driven by the engine belt through a 6PK pulley measuring 117-121MM; those two numbers decide whether it lines up with your original belt and mounting points. If your vehicle uses this layout and carries OE 97701-A3001, item INTL-XZC2446A is the specification to check against.
One of 20,000+ Compressor Models
A wide model range only helps if you can pin down the exact one. For this listing the identifiers are OE 97701-A3001, item INTL-XZC2446A, and the RS11 / 6PK / 117-121MM / 12V specification. Match these against the label on your original compressor so you order the right variant rather than a similar-looking unit.
Need a Different Compressor?
If these numbers do not match your unit, there are two quick ways to get the right part.
Find by Number or Photo
Look up by the OE number, or by the make / model on your vehicle, or send a photo of your original compressor's label and pulley so we can match the exact item.
Ask for a Custom Build
If no listed item fits, tell us the OE number, pulley grooves, diameter and voltage you need, and we will check a build to that specification.
Frequently Asked Questions
Which vehicle is this compressor for?
Application is Hyundai i10 / Kia Ray, with OE number 97701-A3001. Verify against your original part before ordering.
What are the pulley and belt specifications?
6PK grooves with a 117-121MM pulley diameter. These two values determine belt alignment.
Which refrigerant and oil does it use?
R134a refrigerant and PAG46 OR EQUIV lubricating oil, as listed on the part.
What OE number does it replace?
OE 97701-A3001. The item number of this listing is INTL-XZC2446A.














