A/C Compressor for HINO 470 10S13C 1B 139MM 24V INTL-XZC214L
- Model
- INTL-XZC214L
Item specifics
- Item Number
- INTL-XZC214L
- OE NO.
- INTL-XZC214L
- Compressor Type
- 10S13C
- Pulley Grooves
- 1B
- Pulley Diameter
- 139MM
- Voltage
- 24V
- Refrigerant
- R134a
- Oil
- PAG46 OR EQUIV
- Car Make
- HINO
- Car Model
- 470
- Packing Size
- 40*30*46 cm
- Weight
- 23.48 KG
Review
Description
Why This 10S13C Compressor for HINO 470?
Item INTL-XZC214L is a 10S13C compressor built with a 1B / 139MM pulley and 24V electrical operation, matched to OE INTL-XZC214L for HINO 470. Every specification below is read directly from the part — compare it with your original unit before ordering.
How It Works in the A/C Loop
In a truck A/C circuit like the one shown, the compressor draws in and pressurises refrigerant so it can release heat at the condenser and absorb it at the evaporator. Item INTL-XZC214L is the 10S13C unit matched to OE INTL-XZC214L for HINO 470 — a 24V compressor charged with R134a and PAG46 OR EQUIV oil. Use the layout to see where the part you are replacing sits in the system.
Belt and Drive Alignment
This compressor is belt-driven from the engine, so the pulley is the first thing to check. Item INTL-XZC214L uses a 1B pulley measuring 139MM and runs on 24V — those figures decide whether it lines up with the belt and mounting points on your HINO 470. If your original unit carries OE INTL-XZC214L and the same pulley layout, this is the specification to match.
Match the Exact Model, Not a Look-Alike
A large model range is only useful if you can identify the right variant. For this listing the identifiers are OE INTL-XZC214L, item INTL-XZC214L, and the 10S13C / 1B / 139MM / 24V specification. Check them against the label on your original compressor so you order the correct unit instead of one that merely looks similar.
Need a Different Compressor?
If these numbers do not match your unit, there are two quick ways to find the right part.
Find by Number or Photo
Search by the OE number, or by the make and model on your vehicle, or send a photo of your original compressor's label and pulley so we can match the exact item.
Ask for a Custom Build
If no listed item fits, tell us the OE number, pulley grooves, diameter and voltage you need, and we will check a build to that specification.
Frequently Asked Questions
Which vehicle is this compressor for?
Application is HINO 470, with OE number INTL-XZC214L. Verify against your original part before ordering.
What are the pulley and belt specifications?
A 1B pulley with a 139MM diameter, running on 24V. These values determine belt alignment.
Which refrigerant and oil does it use?
R134a refrigerant and PAG46 OR EQUIV lubricating oil, as listed on the part.
What OE number does it replace?
OE INTL-XZC214L. The item number of this listing is INTL-XZC214L.














