A/C Compressor for Peugeot 3008 308 for Citroen C4 2009 - 2022
- Model
- INTL-XZC1298R
Item specifics
- Item Number
- INTL-XZC1298R
- Compressor Type
- 6V12
- Pulley Grooves
- 6PK
- Pulley diameter
- 119MM
- Volt
- 12V
- Refrigerant
- R134a
- Oil
- PAG46 OR EQUIV
- Car Make/Model
- PEUGEOT 3008/308; CITROEN C4/DS4/Berlingo
- Weight
- 21.83 KG
- Packing Size
- 40*30*46 cm
Review
Description
Why This 6V12 Compressor for Peugeot 3008 / 308 & Citroen C4 / DS4 / Berlingo?
Item INTL-XZC1298R is built to the 6V12 configuration with a 6PK / 119MM pulley and 12V operation for Peugeot 3008 / 308 & Citroen C4 / DS4 / Berlingo. Every value below is taken from the actual part — check it against your original unit before ordering.
Where This Compressor Sits in the A/C System
In a fuel-vehicle A/C loop like the one shown, the compressor circulates refrigerant through the condenser, expansion valve and evaporator. Item INTL-XZC1298R is the compressor matched to the listed vehicle applications for Peugeot 3008 / 308 & Citroen C4 / DS4 / Berlingo — running on R134a refrigerant with PAG46 OR EQUIV oil. Use the layout below to see how the part you are replacing connects to the rest of the system.
Built for Fuel-Vehicle A/C Systems
This is a fuel-vehicle air conditioning system — the type fitted to the Peugeot 3008 / 308 & Citroen C4 / DS4 / Berlingo this compressor serves. The 6V12 compressor is driven by the engine belt through a 6PK pulley measuring 119MM; those two numbers decide whether it lines up with your original belt and mounting points. Item INTL-XZC1298R is the specification to check against.
One of 20,000+ Compressor Models
A wide model range only helps if you can pin down the exact one. For this listing the identifiers are item INTL-XZC1298R, and the 6V12 / 6PK / 119MM / 12V specification. Match these against the label on your original compressor so you order the right variant rather than a similar-looking unit.
Need a Different Compressor?
If these numbers do not match your unit, there are two quick ways to get the right part.
Find by Number or Photo
Look up by the OE number, or by the make / model on your vehicle, or send a photo of your original compressor's label and pulley so we can match the exact item.
Ask for a Custom Build
If no listed item fits, tell us the OE number, pulley grooves, diameter and voltage you need, and we will check a build to that specification.
Frequently Asked Questions
Which vehicle is this compressor for?
Application is Peugeot 3008 / 308 & Citroen C4 / DS4 / Berlingo (see the vehicle list above). Verify against your original part before ordering.
What are the pulley and belt specifications?
6PK grooves with a 119MM pulley diameter. These two values determine belt alignment.
Which refrigerant and oil does it use?
R134a refrigerant and PAG46 OR EQUIV lubricating oil, as listed on the part.
How do I confirm the right item?
The item number of this listing is INTL-XZC1298R. Match the vehicle application and the label on your original compressor before ordering.














