DENSO 10S11C 4472608020 447260-8020 88310-OK130 88310OK130 auto ac air conditioning compressor for TOYOTA HILUX Vigo

auto ac compressor,car ac compressor,auto a/c compressor,car a/c compressor,auto air conditioner compressor,car air conditioner compressor,auto compressor,car compressor,ac compressor,a/c compressor,compressor for car,compressor for automobile,a/c part,car part,auto part,auto air-conditioning compressor,auto air-con compressor,automobile compressor,auto ac part,car ac part,auto a/c part,car a/c part)

Auto ac compressor for Toyota Hilux

Specification:

MODEL NO.:INTL-0237

Pulley GROOVE: 1PK 

VOLTAGE: 12V  

Car name: TOYOTA HILUX

PULLEY DIAMETER: 125MM 

OEM: 

88310-OK130

88310OK130

Basic Requirements when servicing an A/C system:

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items. 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective. 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information. 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture. 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced