SANDEN 7H15 709 sd709 SD7H15 auto aircon ac compressor for Volvo 20587125 85000458 8500458 SANDEN: 4324 4326 4134 4116
SANDEN 7H15 709 sd709 SD7H15 auto aircon ac compressor for Volvo 20587125 85000458 8500458 SANDEN: 4324 4326 4134 4116
SANDEN 7H15 709 sd709 SD7H15 auto aircon ac compressor for Volvo 20587125 85000458 8500458 SANDEN: 4324 4326 4134 4116
SANDEN 7H15 709 sd709 SD7H15 auto aircon ac compressor for Volvo 20587125 85000458 8500458 SANDEN: 4324 4326 4134 4116
SANDEN 7H15 709 sd709 SD7H15 auto aircon ac compressor for Volvo 20587125 85000458 8500458 SANDEN: 4324 4326 4134 4116
Price
US $60-120
Model
INTL-C157
MOQ
1 set

Item specifics

Size
PACKING : 25*22*19
Type
Compressor
Car Make
SANDEN 7H15 709 sd709 SD7H15 for Volvo
OE NO.
20587125 85000458 8500458 SANDEN: 4324 4326 4134 4116
QUALITY
GRADE ONE

Review

Description

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

 

SANDEN 7H15 709 SD7H15 SD7H15HD for Volvo ac COMPRESSOR

 

 

 

Specification:

Model number: INTL-C111B

Car name for: Volvo trucks

Compressor Type: SD7H15 SD709

Clutch DIA: 176mm

Grooves: 8pk 

Volt: 24V 

 

Special Notes:

 

OEM#

20587125

85000458

8500458

SANDEN:

4324

4326

4134

4116

 

 

Details

 

COMPRESSOR for Volvo Trucks

 

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced