5Z0820803 CS10061 for Delphi CVC air conditioner ac compressor for Volkswagen VW Fox/Polo/Crossfox/SpaceFox 6pk
5Z0820803 CS10061 for Delphi CVC air conditioner ac compressor for Volkswagen VW Fox/Polo/Crossfox/SpaceFox 6pk
5Z0820803 CS10061 for Delphi CVC air conditioner ac compressor for Volkswagen VW Fox/Polo/Crossfox/SpaceFox 6pk
5Z0820803 CS10061 for Delphi CVC air conditioner ac compressor for Volkswagen VW Fox/Polo/Crossfox/SpaceFox 6pk
5Z0820803 CS10061 for Delphi CVC air conditioner ac compressor for Volkswagen VW Fox/Polo/Crossfox/SpaceFox 6pk
Price
US $60-130
Model
INTL-0568A
MOQ
1 set

Item specifics

Size
PACKING:25*20*18
Type
Compressor
Car Make
for Volkswagen VW Fox/Polo/Crossfox/SpaceFox
OE NO.
5Z0820803 CS10061
QUALITY
1 GRADE
Compressor Type
for Delphi CVC

Review

Description

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.  

CVC for Volkswagen VW Fox/Polo/Crossfox/SpaceFox ac compressor

  5Z0820803 CS10061 for Delphi CVC air conditioner ac compressor for Volkswagen VW Fox/Polo/Crossfox/SpaceFox 6pk

Specification:

Model Number: INTL-0568A

Car name: for Volkswagen VW Fox/Polo/Crossfox/SpaceFox

Compressor Type: for Delphi CVC

Grooves: 6PK

Volt:12v

 

Special Notes:

OEM:
5Z0820803
CS10061
 

Details

 

2003-2007 for Volkswagen Fox 1.0/1.6

 

 5Z0820803 CS10061 for Delphi CVC air conditioner ac compressor for Volkswagen VW Fox/Polo/Crossfox/SpaceFox 6pk5Z0820803 CS10061 for Delphi CVC air conditioner ac compressor for Volkswagen VW Fox/Polo/Crossfox/SpaceFox 6pk5Z0820803 CS10061 for Delphi CVC air conditioner ac compressor for Volkswagen VW Fox/Polo/Crossfox/SpaceFox 6pk

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced