Car air conditioner manual intubation tool FITTING For hose and fittings size: 6# 8# 10# 12
- Model
- INTL-XG111
Item specifics
- Size
- 11
- Type
- tool
- used
- universal
- OE NO.
- INTL-XG111
- PACKING
- 1set IN ONE CARTON
Review
Description
INTL-XG111
Car air conditioner manual intubation tool/ AUTO AC PIPE CASING TOOL FOR REFRIGERATION HOSE AND FITTING For hose and fittings size: 6# 8# 10# 12# No
Parts Name Push-pull quick clamp
Hexagon socket bolt
Moving chuck
Large base
Push-pull quick clamp
Small base
Hexagon socket bolt
Moving chuck
Hose clamp
Fitting clamp
1 Installation and debugging:
1. Install the No. 6 small base according to the corresponding position of the No. 4 large base as shown in the figure;
2. Place two pieces of No. 9 hose clamps opposite each other, the same arc should be placed correspondingly. Specifications: 6# 8# 10# 12#;
3. Place the corresponding No. 10 fitting clamp correctly, and place it after actual comparison;
4. Adjust the tightness by adjusting the No. 2 and No. 7 bolts; each of the large base and the small base has an adjusting bolt;
Product instructions steps:
1. Tighten the air conditioner hoses of different specifications through No. 5 push-pull quick clamp, the tightness can be adjusted by No. 7 bolts, at the same time reserve enough length of air conditioning hose at the end of No 3 moving chuck;
2. Place the air conditioner fittings on No. 3 moving chuck, and realize the locking through the adjustment of fitting clamp with different specifications;
3,Push and pull No. 1 push-pull quick clamp to insert the air conditioner fitting into the air conditioner hose;
4,Loosen No. 5 push-pull quick clamp and No. 1 push-pull quick clamp;
5,By replacing different hose clamps and different fitting clamps you can realize different models conversion of different specifications of air conditioner hoses and fittings.
INTL-XG111
Car air conditioner manual intubation tool/ AUTO AC PIPE CASING TOOL FOR REFRIGERATION HOSE AND FITTING For hose and fittings size: 6# 8# 10# 12# No
Parts Name Push-pull quick clamp
Hexagon socket bolt
Moving chuck
Large base
Push-pull quick clamp
Small base
Hexagon socket bolt
Moving chuck
Hose clamp
Fitting clamp
1 Installation and debugging:
1. Install the No. 6 small base according to the corresponding position of the No. 4 large base as shown in the figure;
2. Place two pieces of No. 9 hose clamps opposite each other, the same arc should be placed correspondingly. Specifications: 6# 8# 10# 12#;
3. Place the corresponding No. 10 fitting clamp correctly, and place it after actual comparison;
4. Adjust the tightness by adjusting the No. 2 and No. 7 bolts; each of the large base and the small base has an adjusting bolt;
Product instructions steps:
1. Tighten the air conditioner hoses of different specifications through No. 5 push-pull quick clamp, the tightness can be adjusted by No. 7 bolts, at the same time reserve enough length of air conditioning hose at the end of No 3 moving chuck;
2. Place the air conditioner fittings on No. 3 moving chuck, and realize the locking through the adjustment of fitting clamp with different specifications;
3,Push and pull No. 1 push-pull quick clamp to insert the air conditioner fitting into the air conditioner hose;
4,Loosen No. 5 push-pull quick clamp and No. 1 push-pull quick clamp;
5,By replacing different hose clamps and different fitting clamps you can realize different models conversion of different specifications of air conditioner hoses and fittings.