Trator CNH / Case / New Holland / Valtra T-180 auto ac compressor with valve DENSO 10P15 10P15C 8 Ears 8pk
- Model
- INTL-XZC731M
Item specifics
- Size
- PACKING : 25*22*19
- Type
- Compressor, DENSO 10P15 10P15C
- Car Make
- Trator CNH / Case / New Holland / Valtra T-180
- OE NO.
- DENSO 10P15 10P15C
- QUALITY
- GRADE ONE
- Car name
- Trator CNH / Case / New Holland / Valtra T-180
- Pulley
- 8PK
- Volt
- 12V/24V
Review
Description
Download the description details at PDF:INTL-XZC731M
Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee.
DENSO 10P15 10P15C Trator CNH / Case / New Holland / Valtra T-180 ac compressor
Specification:
Model number: INTL-XZC731M
Car name: Trator CNH / Case / New Holland / Valtra T-180
Type: DENSO 10P15 10P15C
Pulley: 8PK
Volt: 12V/24V
Packaging Detail
Shipping Detail
Our Factory
Basic Requirements when servicing an A/C system:
1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well
2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.
3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.
4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.
5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.
6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced